Fangpusun - Solar Power Inverter Manufacturer and Solar Charge Controller Supplier   

NEW

Home  > INFO CENTER  > NEW  > 

The Parameters of Fangpusun Xtalent Hybrid Inverter /Charger

The Parameters of Fangpusun Xtalent Hybrid Inverter /Charger

2022-08-15

The parameters of Fangpusun Xtalent Hybrid Inverter /Charger


 

Nominal battery voltage:

Refers to the standard voltage of your battery.

Input voltage range:

Refers to the voltage range supplied by the battery to the inverter. Compared with the standard voltage of the battery, the voltage may decrease when the charge is reduced, and the voltage may increase during the floating charge phase. For example, in a battery with a standard voltage of 12V, Xtalent can operate between 9.5V and 17V.

Output voltage:

The inverter boost output into AC (AC) voltage, generally 110V and 220V two kinds, frequency in 50Hz and 60Hz, Fangpusun Xtalent series are pure sine wave。

Continuous power:The power output of a machine that allows for long-term continuous operation under the environmental conditions specified in the current relevant standards.

Power 30 min.:Within 30 minutes the inverter can overload the output power. Many times we need to use more than one load in a short period of time, in this time the load may exceed the inverter's range.

Power 5 sec:The inverter can overload the output power within 5 seconds. This is mainly applied to some inductive loads, such products need a start-up current much larger than the current required to maintain normal operation (about 3-7 times). For example, a refrigerator that consumes about 150 watts in normal operation can have a starting power of more than 1,000 watts.

Max.efficiency:Inverter conversion efficiency = inverter output power/inverter DC input power × 100%. If the number is closer to 1, the efficiency is shown to be better. For inverters, the general efficiency is about 70%~80%, and Fangpusun Xtalent can achieve the highest 96%.

Own consumption stand by:No load loss is constant loss. It does not depend on the current passing through, but depends on the voltage applied to the component. Usually we think of it as the energy consumption without loading the load.

Own consumption ON:Self-consumption of the inverter after the load is switched on.

 

Battery Charger-Charge Characteristic:Fangpusun Xtalent inverter uses AC power to charge batteries in different modes, which is very important for battery protection.

Battery Charger-Maximum charging current:Fangpusun Xtalent inverter uses AC power to charge the maximum current of the battery.

Battery Charger-Input voltage range:Fangpusun Xtalent inverter uses AC power supply to charge the battery voltage range, whether in 220V or 120V in a certain range can float up and down.

 


Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: