Solar Battery Charger Controller, 80a Mppt Solar Charge Controller

01.

FLEXmax MPPT 60A 80A

The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from fangpusun.The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30%compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).

Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by fangpusun, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.

FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.

Product Features

Increases PV Array Output by up to 30%

Advanced Continuous Maximum Power Point Tracking

Full Power Output in Ambient Temperatures up to 104°F (40°C)

Battery Voltages from 12 VDC to 60 VDC

Programmable Auxiliary Control Output

Built-in 128 days of Data Logging

Fully Network Integrated and Programmable

Options

1.Menu-driven operation
2.Programming by buttons

Product Parameters

Compliant with European Standards(CE); RoHS compliant; ISO 9001

	FLEXmax MPPT60	FLEXmax MPPT80
Nominal Battery Voltages	12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
Maximum Output Current	60 amps @ 104° F (40° C) with adjustable current limit	80 amps @ 104° F (40° C) with adjustable current limit
Maximum Solar Array STC Nameplate	12 VDC systems 900 Watts / 24 VDC systems 1800 Watts /	12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts /
	48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts	48 VDC systems 5000 Watts / 60 VDC Systems 7500 Watts
NEC Recommended Solar Anay STC Nameplate	12 VDC systems 750 Watts / 24 VDC systems 1500 Watts /	12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts /
	48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts	48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts
PV Open Circuit Voltage (VOC)	150 VDC absolute maximum coldest conditions /145 VDC start-up
	and operating maximum
Standby Power Consumption	Less than 1 Watt typical
Power Conversion Efficiency	98.1% @ 60 Amps in at 48 VDC System voltage - Typical	97.5% @ 60 Amps in at 48 VDC System voltage - Typical
Charging Regulation	Five Stages: Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set points	10 to 80 VDC user adjustable with password protection
Equalization Charging	Programmable Voltage Setpoint and Duration - Automatic Termination when completed
Battery Temperature Compensation	Automatic with optional RTS installed / 5.0 mV per ° C per 2V battery cell
Voltage Step-Down Capability	Can charge a lower voltage battery from a higher voltage PV array
	- Max 150 VDC input
Programmable Auxilary Control Output	12 VDC output signal which can be programmed for different control
	applications (Maximum of 0.2 amps DC)
Status Display	3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
Remote Display and Controller	Optional Mate or Mate2 with RS232 Serial Communications Port
Network Cabeling	Proprietary network system using RJ 45 Modular Connectors with
	CAT 5e Cable (8 wires)
Data Logging	Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float,
	Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min
	Battery Voltage and Absorb for each day along with total Accumulated
	Amp Hours, and kW Hours of production
Hydro Turbine Applications	Consult factory for approved Turbines
Positive Ground Applications	Requires two Pole Breakers for switching both positive and Negative
	Conductors on both Solar Array and Battery Connections (HUB-4 and
	HUB-10 can not be used for use in positive ground applications)
Operating Temperature Range	Minimum -40° to maximum 60° C (Power capacity of the controller is
	automatically derated when operated above 40° C)
Environmental Rating	Indoor Type 1
Conduit Knockouts	One 1" (35mm)on the back; One 1" (35mm) on the left side;
	Two 1" (35mm) on the bottom
Weight - Unit	5.3 kg	5.6 kg
- Shipping	6kg	6.3 kg
Dimensions - Unit	40 x 14 x 10 cm	44 x 14 x 10 cm
- Shipping	46 x 30 x 20 cm	51 x 24 x 21.5 cm
Options	Remote Temperature Sensor (RTS), HUB 4,HUB 10, MATE, MATE 2
Menu Languages	English & Spanish