The communication module Xcom-232i, equipped with a serial port RS-232, enables to be informed of the state of a system consisting of one or several Xtalents, s or VarioStrings.

It is then possible to read all data that can be displayed on the remote control basic screen and also to modify the configuration parameters. An Xtalents, or VarioString system can therefore be connected to various SCADA control and supervision devices (PC, programmable logic controller, and microcontroller).

From a more technical point of view, the electrical interface RS-232 allows for instance the data transmission with GSM modems, RS-232 bridges to TCP/IP or also with long distance converters RS-422. Besides, in order to secure a total electrical separation between the Xtalents, or VarioString system and the control and supervision device, the port is protected by means of a galvanic isolation.

The proprietary and fully documented protocol is available in the Downloads section under the heading "Software and Updates"..

The module Xcom-232i is also having a function of data recording and analysing (Data logger function).

For more information on this function, 

If you have no serial port RS-232, there is a version with CAN bus.

______________________________________________

Dimension H x L x l: 110.5 x 75 x 26 mm.
Supplied with a 2 m communication cable.