Hybrid Inverter Manufacturer And Pure Sine Wave Inverter Supplier

01.

AJ SERIES PURE SINE INVERTER

The AJ series pure sine wave inverters convert battery voltage into high-quality 230/120Vac which can be used for all electrical appliances.Designed to meet industrial and domestic needs the AJ is the optimal solution for stand-alone applications fulfilling the highest requirements in terms of comfort,safety and reliability.Manufactured in China with a 5-year warranty and delivered with AC-and battery cables,the AJ it is a true "plug and forget solution".

pure sine wave inverter factory in China

Reliable and compact for your small to medium sized system

·High and steady efficiency

·Outstanding overload capabilities

·Digital regulation and control by microprocessor

·Electrical supply to any type of appliance

·Full internal protection

·Battery lifetime optimization(B.L.O.) function

·Plug&Play,suplied with battery and AC cables

Optional built-in solar regulator

·Optional integrated PWM solar charge controller with 3 stages (I/U/UO)

Accessory

·Remote control (JT8) enables the control (ON/OFF) and the status display(On,Standby, Temporary Off)

Pangpusun pure sine inverter manufacturer

Options

The AJ series pure sine wave inverters convert battery voltage into high-quality 230/120Vac which can be used for all electrical appliances

Pure Sine Inverter Parameters

Compliant with European Standards(CE); ROHS compliant

Technical data		AJ500-12-S	AJ 600-24-S	AJ 700-48-S	AJ 2100-12-S
Inverter
Nominal battery voltage		12Vdc	24Vdc	48 Vdc	12 Vdc
Input voltage range		10.5-16Vdc	21-32Vdc	42-64Vdc	10.5-16Vdc
Continuous power@25℃		400 VA	500 VA	500 VA	2000 VA
Power 30 min.@ 25℃		500 VA	600 VA	700 VA	2100 VA
Power 5 min.@ 25℃		575 VA	675 VA	900VA	2450 VA
Power 5 sec.@ 25℃		1000VA	1200 VA	1400 VA	5000 VA
Asymmetric load		250 VA	300 VA	300VA	1000 VA
Max.efficiency(%)		93 %	94 %	94%	92 %
Cos j max.		0.1-1up to 400 VA	0.1-1up to 500 VA	0.1-1up to 500VA	0.1-1up to 2000VA
Detection of the load		Adjustable: 1 to 20W
Short-circuit current AC 2 sec.		5.2 Aac(10.4 Aac*)	5.7 Aac(11.4 Aac*)	7 Aac(14Aac*)	26 Aac(52Aac*)
Output voltage		Sine wave 230 Vac(120Vac*)±5 %
Frequency		50Hz(60Hz*)±0.05%(crystal controlled)
Distortion THD (resistive load)		<3%(@Pnom&Uinnom.)
Consumption Stand-by		0.4 W	0.6 W	1.5 W	0.7W
Consumption "ON"no load		4.6 W	7.2 W	12W	16W
Overheat protection(±5℃)		Shut down@75℃-Auto-restart@70℃
Overload and short circuit protection		Automatic disconnection with 2 time restart attempt
Reverse polarity protection as intemal fuse		120 A	90 A	60 A	Not protected
Deep discharge battery protection		Shut off@0.87×Uom-Automatic restart@Unom
Max. battery voltage		Shut off@>1.33×Unom-Automatic restart@<Umax
Acoustic alarm		Before low battery or overheating disconnection
General data
Weight		4.5 kg			19KG
Dimension h/w/l[mm]		142/240/84			273/399/117
Protection index IP		IP 30 conforms to DIN 40050
Certification ECE-R 10 (E24)		√	√	×	√
Conformity		Low Voltage Directive (LVD) 2014/35/EU: EN/IEC 62109-1, 62109-2, 62477-1 Electromagnetic Compliance (EMC) Directive 2014/30/EU: EN/IEC 61000-3-3, 61000-6-2, 61000-6-4, 62040-2
Operating temperature		-20℃ to +50℃
Relative humidity in operation		95 % without condensation
Ventilation forced		From 45℃±5℃
Acoustic level		<45 dB(with ventilation)
Approximate correction of Pnom		-1.5%/℃ from +25℃
Recommended battery capacity		>5×Pnom/Unom(recommended value in Ah)
Length cables(Battery/AC out)		1.5m/1 m			1.7m/1 m
Bulit in PWM
Solar regulator	Voltage max.	25 Vdc	45 Vdc	90 Vdc	25 Vdc
	Current max.	15 Adc			30 Adc
	Principle	Floating 3 stages (I/U/UO)
	Absorption voltage	14.4Vdc	28.8Vdc	57.6Vdc	14.4Vdc
	Floating voltage	13.6Vdc	27.2Vdc	54.4Vdc	13.6Vdc
Remote control (RCM-01/-02/-03)		√	√	√	√